6000 Последовательный подшипник

The seals of the 6000 Последовательный подшипник can be divided into self-sealing and external sealing. The so-called 6000 Series Bearing self-sealing is to make the 6000 Series Bearing itself a device with sealing performance. Such as 6000 Series Bearing with dust cover, sealing ring, и так далее. This kind of seal takes up little space, is easy to install and disassemble, and has a relatively low cost. The so-called 6000 Series Bearing plus sealing performance device is a sealing device with various performances manufactured inside the mounting end cap, и так далее. 6000 Series Bearing additional seals are divided into non-contact seals and contact seals. Among them, the non-contact seal is suitable for high-speed and high-temperature occasions, and has different structural forms such as gap type, labyrinth type and gasket type. Contact seals are suitable for medium and low-speed working conditions, and commonly used structural forms such as felt seals and leather cup seals.

Bearing No.	Bore diameter	Outer diameter	Width	Radius	KN Basic rated load		Limit speed		BallComplement		Вес
	D	D	W	R	KN Basic rated load		Limit speed		BallComplement		Kg/pc
	Mm Inch	Mm Inch	Mm Inch	Mm Inch	Dynamic load	Static load	Grease	Oil	Нет.	Size.
					C	CO	R/min	R/min		миллиметр
604	4\ .1575	12\ .4724	4\ .1575	0.2\ .008	0.97	0.36	43000	51000	8	1.588	0.002
605	5\.1969	14\ .5512	5\.1969	0.2\ .008	1.33	0.505	39000	46000	8	2.000	0.0035
606	6\.2362	17\ .6693	6\ .2362	0.3\ .012	2.19	0.865	30000	38000	8	2.831	0.006
607	7\.2756	19\ .7480	6\ .2362	0.3\ .012	2.24	0.91	28000	36000	7	3.500	0.008
608	8\ .3149	22\.8661	7\.2756	0.3\ .012	3.35	1.4	26000	34000	7	3.969	0.012
609	9\ ,3543	24\ .9449	7\.2756	0.3\ .012	3.4	1.45	22000	30000	7	3.969	0.014
6000	10\ .3937	26\ 1.0236	8\ .3150	0.3\ .012	4.55	1.96	20000	28000	7	4.763	0.019
6001	12\ ,4724	28\ 1.1024	8\ .3150	0.3\ .012	5.1	2.39	19000	26000	8	4.763	0.021
6002	15\.5906	32\ 1.2598	9\.3543	0.3\ .012	5.6	2.84	18000	24000	9	4.763	0.03
6003	17\.6693	35\ 1.3780	10\ .3937	0.3\ .012	6.8	3.35	17000	22000	10	4.763	0.039
6004	20\.7874	42\ 1.6535	12\ .4724	0.6\ .024	9.4	5.05	15000	19000	9	6.350	0.069
6005	25\.9843	47\ 1.8504	12\ .4724	0.6\ .024	10.1	5.85	13000	17000	10	6.350	0.08
6006	30\ 1.1811	55\ 2.1654	13\ .5118	1.0\ .039	13.2	8.3	12000	15000	11	7.144	0.116
6007	35\ 1.3780	62\ 2.4409	14\ .5512	1.0\ .039	16	10.3	10000	13000	11	7.938	0.155
6008	40\ 1.5748	68\ 2.6772	15\.5906	1.0\ .039	16.8	11.5	8000	11000	12	7.938	0.185
6009	45\ 1.7717	75\ 2.9528	16\ .6299	1.0\ .039	21	15.1	7200	9000	12	8.731	0.231
6010	50\ 1.9685	80\ 3.1496	16\ .6299	1.0\ .039	21.8	16.6	6400	7800	13	8.731	0.25
6011	55\ 2.1654	90\ 3.5433	18\ .7087	1.1\ .043	29.6	21.2	7700	9000	12	10.319	0.366